Order Products : sales@su-jiao.com
ExxonMobil™ LDPE LD 150BW Wire & Cable
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OyYIR9_ExxonMobil-LDPE-LD-150BW-Wire-Cable.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD 150BW is a low-density polyethylene with low antioxidant content, suitable for low-pressure and medium-pressure cross-linked insulators produced by one-step or two-step silane process. Through internal granulation, it can be used for medium-pressure insulators cross-linked with peroxides. Insufficient amounts of antioxidants and copper inhibitors should be added to make the product meet specific anti-aging requirements. |
| General Information | |
|---|---|
| Additive |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.78 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 48 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 13.0 | MPa | ASTM D638 |
| Fracture | 14.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 16 | % | ASTM D638 |
| Fracture | 550 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 270 | MPa | ASTM D790 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant | 2.30 | ASTM D150 | |
| Dissipation Factor | < 4.0E-4 | ASTM D150 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 GI-1210 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Staramide ACF2 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| THERMOLAST® K TP4CDB (Series: EX) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Monprene® CP-32054G CLR | Teknor Apex Company | TPE | Monprene® |
| XENOY™ 1760 resin | SABIC Innovative Plastics Asia Pacific | PC+PBT | XENOY™ |
