Order Products : sales@su-jiao.com
Generic PAEK - Glass Fiber
| Category: | PAEK , Polyaryletherketone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OwAmGY_Generic-PAEK---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PAEK - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 - 1.65 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.099 - 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6210 - 15100 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.8 - 3.2 | % | ASTM D638 |
| Flexural Modulus (23°C) | 5520 - 14800 | MPa | ASTM D790 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (23°C) | 3.48 - 3.74 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.0 - 5.1E-3 | ASTM D150 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 149 - 150 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 360 - 366 | °C | |
| Middle Temperature | 371 | °C | |
| Front Temperature | 377 - 382 | °C | |
| Mold Temperature | 183 - 184 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PAEK - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VYLOPET® EMC330 | TOYOBO America, Inc. | PC+PBT | VYLOPET® |
| UBESTA 3024 LU | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| UBESTA 3030 JI6L | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| alphalon™ 40 | Grupa Azoty ATT Polymers GmbH | Nylon 6 | alphalon™ |
| ExxonMobil™ PP7085E1 | ExxonMobil Chemical | PP Impact Copolymer | ExxonMobil™ |
