Order Products : sales@su-jiao.com
EnCom TF20 PBET
| Category: | Polyester, TP , Thermoplastic Polyester |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OuWEb8_EnCom-TF20-PBET.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Talc Filled Polyester |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.49 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 57.4 | MPa | ASTM D638 |
| Flexural Modulus | 4150 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 105 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 260 - 288 | °C | |
| Middle Temperature | 266 - 302 | °C | |
| Front Temperature | 271 - 310 | °C | |
| Nozzle Temperature | 277 - 310 | °C | |
| Processing (Melt) Temp | 277 - 310 | °C | |
| Mold Temperature | 93.3 - 116 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Ultra HDPE 20 | ResMart | HDPE | ResMart Ultra |
| Sinvicomp DBS8615 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| 3M™ Dyneon™ Fluoroplastic PVDF 32008/0009 | 3M Advanced Materials Division | PVDF | 3M™ Dyneon™ Fluoroplastic |
| OnForce™ LFT LF6600-5002 HI BLACK | PolyOne Corporation | Nylon, Unspecified | OnForce™ LFT |
| Hifax CA1110 G3 1740 | LyondellBasell Industries | TPO (POE) | Hifax |
