Order Products : sales@su-jiao.com

Shuang-Bang AB-205

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Shuang-Bang Industrial Corp.
Trademark:	Shuang-Bang
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OpzVf8_Shuang-Bang-AB-205.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Two component PU Resins General type resin (waterproof) Because the molecular weight of two componet resin is quite low, adding and mixing adequate crosslinker is necessary. It would increase molecular weight and make more meshed PU structure, which would enhance the strength of membrane. Applied to yarn fixation, primer coating, pore filling. The high solid content would enhance water pressure resistance, gross, and firm-feeling of textile coating. Adding promotors would enhance aging condition and reinforce adhesion. Cloth lamination. Lamination of cloth and TPU&PVC. For direct coatings. High water resistance, non-yellowing, hydrosis resistance, good hand-feel, good peeling strength. PU resin for direct coating. Applied to bottoming.

Message

Two component PU Resins

General type resin (waterproof)

Because the molecular weight of two componet resin is quite low, adding and mixing adequate crosslinker is necessary. It would increase molecular weight and make more meshed PU structure, which would enhance the strength of membrane. Applied to yarn fixation, primer coating, pore filling. The high solid content would enhance water pressure resistance, gross, and firm-feeling of textile coating. Adding promotors would enhance aging condition and reinforce adhesion.

Cloth lamination. Lamination of cloth and TPU&PVC. For direct coatings.

High water resistance, non-yellowing, hydrosis resistance, good hand-feel, good peeling strength.

PU resin for direct coating. Applied to bottoming.

General Information
Features	Crosslinkable Hydrolysis Resistant Moisture Resistant
Uses	Coating Applications Laminates
Appearance	Transparent - Slight Yellow

Additional Information	Nominal Value	Unit
Solvents	DMF/TOL

Uncured Properties	Nominal Value	Unit
Color	Clear/Yellow Tint
Solids Content	44 to 46	%
Viscosity (25°C)	30 to 60	Pa·s

Cured Properties	Nominal Value	Unit
Tensile Modulus (100% Secant)	0.981 to 1.96	MPa
Tensile Strength	> 9.81	MPa
Tensile Elongation at Break	> 400	%

Resin Grade	Manufacturer	Category	Trademark
PRIMACOR™ 1321	The Dow Chemical Company	EAA	PRIMACOR™
SABIC® STAMAX 30YK270 resin	SABIC Innovative Plastics	PP, Unspecified	SABIC® STAMAX
RTP 1002 TFE 15	RTP Company	PBT	RTP
ASTALAC™ ABS M7	Marplex Australia Pty. Ltd.	ABS	ASTALAC™
Generic PC+Acrylic	Generic	PC+Acrylic	Generic