Order Products : sales@su-jiao.com
Monprene® RG-17282 NAT
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Onm9Pn_Monprene-RG-17282-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene®RG-17282 NAT is a thermoplastic elastomer (TPE) material,. This product is available in North America and is processed by extrusion or injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 85 | ASTM D2240 | |
| Shaw A, 5 seconds | 83 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 5.17 | MPa | ASTM D412 |
| 200% strain | 5.62 | MPa | ASTM D412 |
| Flow : 300% strain | 6.21 | MPa | ASTM D412 |
| Tensile Strength - Flow (Break) | 11.2 | MPa | ASTM D412 |
| Tensile Elongation - Flow (Break) | 760 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 - 193 | °C | |
| Middle Temperature | 177 - 199 | °C | |
| Front Temperature | 182 - 204 | °C | |
| Nozzle Temperature | 188 - 210 | °C | |
| Processing (Melt) Temp | 188 - 210 | °C | |
| Mold Temperature | 25.0 - 65.6 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C). |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NORYL™ FE1630PW resin | SABIC Innovative Plastics Europe | PPE+PS | NORYL™ |
| Garathane™ X 96-322-A NAT | AlphaGary | PVC Alloy | Garathane™ |
| E-Pos 530 | Epocat Nederland BV | Epoxy | E-Pos |
| Hysun® A6020 | Ravago Manufacturing Americas, LLC | ASA+PC | Hysun® |
| PEARLSTICK® 48-60/03 | Lubrizol Advanced Materials, Inc. | TPU-Polyester | PEARLSTICK® |
