Order Products : sales@su-jiao.com

Addisil™ 6210

Category:	Silicone , Silicone
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OmxEa9_Addisil-6210.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Addisil 6210 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures. Addisil 6210 is an off white one component thixotropic material. Key Features and Benefits One component product - no mixing required Room temperature storage Fast cure at elevated temperature (in a range of 140°C to 230°C) Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic) No formation of cure by-products Non-corrosive to metals Good performance over a wide temperature range Service temperature -50°C to 200°C

Message

Addisil 6210 silicone adhesive is a one-component heat curable silicone adhesive sealant which will bond to many substrates without a primer and which will cure rapidly at elevated temperatures. This product has a very long working time at room temperature and will not cure completely until exposed to elevated temperatures.

Addisil 6210 is an off white one component thixotropic material.

Key Features and Benefits

One component product - no mixing required

Room temperature storage

Fast cure at elevated temperature (in a range of 140°C to 230°C)

Primerless adhesion to many types of substrates (e.g. glass, enamel, aluminium, ceramic)

No formation of cure by-products

Non-corrosive to metals

Good performance over a wide temperature range

Service temperature -50°C to 200°C

General Information
Features	Bondability Fast Cure Good Adhesion Heat Cure Non-Corrosive Thixotropic
Uses	Adhesives Sealants
Appearance	Off-White

Thermoset	Nominal Value	Unit
Shelf Life (< 27°C)	> 17	wk

Uncured Properties	Nominal Value	Unit
Density	1.21	g/cm³
Viscosity	160 to 360	Pa·s
Curing Time
200°C	8.3E-3	hr
175°C	< 0.033	hr
150°C	< 0.083	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	50
Tensile Strength	5.60	MPa
Tensile Elongation at Break	380	%
Tear Strength	18.0	kN/m

Resin Grade	Manufacturer	Category	Trademark
Nycal™ 2050R43H	Technical Polymers, LLC	Nylon 612	Nycal™
Adstif EA5075	PolyMirae	PP Copolymer	Adstif
CERTENE™ LLBD-2024G	Muehlstein	LLDPE	CERTENE™
Envirez® MR 56301	Ashland Performance Materials	Polyester, TS	Envirez®
OnFlex™ S EF 70A-3S1975	PolyOne Corporation	TPE	OnFlex™