Order Products : sales@su-jiao.com
Formolene® 6613N
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OmERhU_Formolene-6613N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 6613N is a copolymer of polypropylene designed and formulated for injection molding applications. It embodies a unique combination of polymerization technology and additive know-how that give it an excellent balance of stiffness and impact strength. Formolene 6613N offers advantages in both processing and physical properties over many polypropylenes used for pails, crates and other rugged injection molded applications. Formolene® 6613N meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 92 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 22.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -28°C, Injection Molded | 110 | J/m | |
| 0°C, Injection Molded | 130 | J/m | |
| 23°C, Injection Molded | 590 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 97.0 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 51.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tectron E1100 | TECTRON Systems Pte Ltd | TPV | Tectron |
| YUNGSOX® PP 3003 | Formosa Polypropylene | PP Impact Copolymer | YUNGSOX® PP |
| Europrene Latice® 5583 | Versalis S.p.A. | SBR, Emulsion | Europrene Latice® |
| Di-Pak™ E-4021 | Hapco Inc. | TP, Unspecified | Di-Pak™ |
| Kumho SBR 1753 | Korea Kumho Petrochemical Co., Ltd. | SBR, Emulsion | Kumho SBR |
