Order Products : sales@su-jiao.com
Andur 2-60 DP
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OkgNU0_Andur-2-60-DP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 2-60DP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 60 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 625 | cP | ASTM D2393 |
| 100°C | 180 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 7.2 to 7.6%Specific Gravity, ASTM D792, 77°F: 1.1 g/mlSpecific Gravity, ASTM D792, 212°F: 1.06 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® VA10300 ALU | Tekni-Films, a div of Tekni-Plex | Film, PVC/PCTFE | TEKNIFLEX® |
| Surlyn® 1825 | DuPont Packaging & Industrial Polymers | Ionomer | Surlyn® |
| VICTREX® PAEK WG™ 101 | Victrex plc | PAEK | VICTREX® PAEK |
| TRIBIT® 1500G20 | Samyang Corporation | PBT | TRIBIT® |
| FORMION® FI 390 | A. Schulman Inc. | Ionomer | FORMION® |
