Order Products : sales@su-jiao.com

NuSil MED1-4855

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ok2gF6_NuSil-MED1-4855.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts. LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength. Comments: INJECTION MOLDING ELASTOMER, SELF LUBRICATING

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.

LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

Comments: INJECTION MOLDING ELASTOMER, SELF LUBRICATING

General Information
Filler / Reinforcement	Silica
Features	Fast Cure Good Colorability High Strength Self Lubricating
Uses	Gaskets Medical/Healthcare Applications Overmolding Seals Valves/Valve Parts
Agency Ratings	USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Mechanical	Nominal Value	Unit
Tensile Strength (200% Strain)	3.62	MPa

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Extrusion Rate	150	g/min

Uncured Properties	Nominal Value	Unit
Density	1.15	g/cm³
Curing Time (165°C)	0.083	hr
Pot Life (25°C)	> 1400	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	55
Tensile Strength	7.58	MPa
Tensile Elongation at Break	480	%
Tear Strength	39.4	kN/m

Resin Grade	Manufacturer	Category	Trademark
RTP 800 GB 10 TFE 15	RTP Company	Acetal (POM) Copolymer	RTP
ALTECH® PP-B A 1000/540	ALBIS PLASTIC GmbH	PP Copolymer	ALTECH® PP-B
KOCETAL® SO301	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
Hifax TYC 258X NA BLACK	LyondellBasell Industries	PP, Unspecified	Hifax
SCHULAMID® 6 GF 15 H K1432 BLACK 96.8148	A. Schulman Europe	Nylon 6	SCHULAMID®