Order Products : sales@su-jiao.com

RenPIM® VG 5282 Polyol/ 5281 Isocyanate

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Huntsman Advanced Materials
Trademark:	RenPIM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OhKzx4_RenPIM-VG-5282-Polyol-5281-Isocyanate.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production. RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press. Parts are made within minutes at low cost giving you time and cost savings. The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures. You can choose materials from a clear and concise product range at competitive prices to suit your requirements. The products are well proven, thoroughly tested and endorsed by MCP.

Message

A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production.

RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press.

Parts are made within minutes at low cost giving you time and cost savings.

The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures.

You can choose materials from a clear and concise product range at competitive prices to suit your requirements.

The products are well proven, thoroughly tested and endorsed by MCP.

General Information
Features	Good Colorability Good Dimensional Stability Resilient Tack Free
Appearance	Amber
Forms	Pellets
Processing Method	Vacuum Casting

Hardness	Nominal Value		Test Method
Shore Hardness ¹(Shore A)	65		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	2.62 to 4.29	MPa	ISO 527-2
Tensile Strain (Break)	85 to 92	%	ISO 527-2

Thermoset	Nominal Value	Unit
Pot Life (40°C)	5.0 to 10	min
Demold Time (70°C)	120	min

Additional Information	Nominal Value	Unit
Maximum Layer Thickness	1.00	cm
Mixing Ratio	100:35 to 100:40

Note Message
1 .	Range: 60 to 70 A

Resin Grade	Manufacturer	Category	Trademark
SMOKEGUARD™ O 301 NATURAL	AlphaGary	Polyolefin, Unspecified	SMOKEGUARD™ O
Daelim Po1y® PP-124M	DAELIM INDUSTRIAL CO., LTD.	PP, Unspecified	Daelim Po1y®
Daelim Po1y® LL-05S	DAELIM INDUSTRIAL CO., LTD.	LLDPE	Daelim Po1y®
Fainplast PVC GS 54/AM	Fainplast Compounds S.r.l	PVC, Unspecified	Fainplast PVC
DuraGrip® DGR 6040NC	Advanced Polymer Alloys	TPE	DuraGrip®