Order Products : sales@su-jiao.com
Andur M-22 (TEG)
| Category: | PUR-Ester/MDI , Polyurethane (Polyester, MDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OgapIq_Andur-M-22-TEG-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur M-22 is an MDI-Ester prepolymer that, when processed with close attention to handling procedures and formulation, produces high quality elastomers. These elastomers perform very well in dynamic applications. |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 60 | ASTM D2240 | |
| Shaw D | 15 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compressive Strength | ASTM D695 | ||
| 2% strain | 0.172 | MPa | ASTM D695 |
| 5% strain | 0.345 | MPa | ASTM D695 |
| 10% strain | 0.621 | MPa | ASTM D695 |
| 15% strain | 0.896 | MPa | ASTM D695 |
| 20% strain | 1.24 | MPa | ASTM D695 |
| 25% strain | 1.65 | MPa | ASTM D695 |
| 50% strain | 5.52 | MPa | ASTM D695 |
| Taber Abrasion Resistance | 3.50 | mg | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 1.38 | MPa | ASTM D412 |
| 300% strain | 1.55 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 16.2 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 720 | % | ASTM D412 |
| Compression Set | 27 | % | ASTM D395 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 7.0 - 10 | min | |
| Demold Time | 90 | min |
| Additional Information |
|---|
| Die C Tear, ASTM D1004: 160 pliAverage Split Tear, ASTM D1938: 95 pliStoichiometry Curative Level: 97%Break Set, ASTM D412-80: 50%NBS Abrasion: 180% Rubber StandardParts of curative per 100 parts Andur M-22, 6.5% NCO: 11.26 parts by weightParts of curative per 100 parts Andur M-22, 6.55% NCO: 11.36 parts by weightParts of curative per 100 parts Andur M-22, 6.6% NCO: 11.44 parts by weightParts of curative per 100 parts Andur M-22, 6.65% NCO: 11.53 parts by weightParts of curative per 100 parts Andur M-22, 6.7% NCO: 11.62 parts by weightMix Temperature: Andur M-22: 194-212°F Curative TEG: 77-158 °F Stability: Ambient Temperature, 25°C: 6 Months Melting Temperature, 60°C: 1 Month Processing Temperature, 90°C: 12 Hours Processing Temperature, 105°C: 3 Hours |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 90.0 - 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ferro PP HPP30GR45BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| ESTADIENE 1218 V0 | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
| Jampilen RP215M | Jam Polypropylene Company | PP Random Copolymer | Jampilen |
| MTEGRITY™ HDPE HD800 | M. Holland Company | HDPE | MTEGRITY™ HDPE |
| Sylvin 9077-75LMW Red 6190 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
