Order Products : sales@su-jiao.com
EVALENE® HDPE HB23551
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | JG Summit Petrochemical Corporation |
| Trademark: | EVALENE® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OgCd5r_EVALENE-HDPE-HB23551.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HDPE is used to make large drums, bleach bottles, shopping bags, crates nets and pails. Tough. Rigid. Heavy Duty. With High Chemical Resistance. These qualities make Evalene® HDPE suitable for a diverse line of industrial products. Blown Film: Shopping and grocery bags Pipes: Pressure and non-pressure pipes Blow Molding: Bottles for household and industrial chemicals, large drums Injection Molding: Pallets, crates, cases, trays, toys, houseware, caps |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg 1 | 0.26 | g/10 min | |
| 190°C/21.6 kg | 23 | g/10 min |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2(Injection Molded) | 1000 | MPa | ASTM D638 |
| Tensile Strength 3(Yield, Injection Molded) | 28.0 | MPa | ASTM D638 |
| Tensile Elongation 4(Break, Injection Molded) | > 500 | % | ASTM D638 |
| Note Message | |
|---|---|
| 1 . | Product is controlled by Flow Index. melt Index is estimated for customer use. |
| 2 . | 5.0 mm/min |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1002 HI UV | RTP Company | PBT | RTP |
| APEX® 3610-70 | Teknor Apex Company | PVC, Flexible | APEX® |
| APEX® 84-G186B-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Braskem PE GP100BLXP | Braskem | HDPE | Braskem PE |
| Braskem PE SHE150 | Braskem | HDPE | Braskem PE |
