Order Products : sales@su-jiao.com
CERTENE™ SGM-080K
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OemvE7_CERTENE-SGM-080K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SGM-080K is a certified prime grade offering supreme practical toughness and strength for general purpose INJECTION MOLDING applications. SGM-080K is an easy processing resin that offers good balance of processability and high clarity. SGM-080K applications include thin-walled containers, disposable cups, decorative lighting, cutlery, audio and video cassette enclosures, and blends with High Impact Polystyrene for improvement of flexural and toughness properties. SGM-080K complies with UL94HB and FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 7.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(M-Scale) | 72 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 3030 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 46.2 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 2.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 3100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 92.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 98.0 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrathane™ ALC-93A | Biomerics, LLC | TPU-PC | Quadrathane™ |
| PurSil™ 35 83A | DSM Biomedical Inc. | TPU, Unspecified | PurSil™ |
| Vipel® F701-PTT-25 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| HAIPLEN EP50 C10 Z1 | Taro Plast S.p.A. | PP Copolymer | HAIPLEN |
| Osterlene® LLB0918SAH | Osterman & Company | LLDPE | Osterlene® |
