Category: | LDPE , Low Density Polyethylene |
Manufacturer: | SINOPEC Shanghai Petrochemical Co. Ltd. |
Trademark: | Sanren |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | OcaAGy_Sanren-Q400-On-spec-.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
The oblate pellet product is colourless with excellent chemical stability. Under normal conditions, the product is acid resistant, alkali resistant and salt resistant. It possesses certain mechanical properties and water-proof characteristics and air permeability. Scope of Application: Light-duty film, and mulching film. |
General Information | |
---|---|
Features |
|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.922 | g/cm³ | Internal method |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.2 - 4.8 | g/10 min | Internal method |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength (Yield) | > 9.00 | MPa | Internal method |
Tensile Elongation (Break) | > 450 | % | Internal method |
Optical | Nominal Value | Unit | Test Method |
---|---|---|---|
Haze | < 11 | % | Internal method |
Additional Information | Nominal Value | Unit | |
---|---|---|---|
Fish Eye | |||
0.300 to 2.00mm | pcs/1200 cm² | ||
Linking : 0.500 to 2.00mm | pcs/20 cm² | ||
Hue | |||
Impurities (> 100.0 µm) | pcs/100 g | ||
Streaks | B | ||
Cleanliness: <20 pieces/kg |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Bergamid™ A700 TM-YF | PolyOne Corporation | Nylon 66 | Bergamid™ |
ALTECH® PA6 A 2015/321 GF15 UV IM | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
CALP 4200G | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
Fenochem C 4500 | Chemiplastica, Inc. | Phenolic | Fenochem |
Edgetek™ X4 ET3500-5004 White1 | PolyOne Corporation | ASA+PC | Edgetek™ |