Order Products : sales@su-jiao.com
INSULCAST® RTVS 16
| Category: | Silicone Rubber, RTV-2 , Silicone Rubber, RTV-2 |
| Manufacturer: | ITW Polymers Coatings North America |
| Trademark: | INSULCAST® RTVS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ObWQcG_INSULCAST-RTVS-16.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTVS 16 is a multi-purpose casting/encapsulating, potting and sealing compound. RTVS 16 has been used successfully to protect electronic components, assemblies and delicate systems. RTVS 16 exhibits excellent electrical properties, low temperature flexibility and high temperature stability. A variety of catalysts are available for different cure situations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 5.52 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 130 | % | ASTM D412 |
| Tear Strength 1 | 7.01 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 2.1E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.31 | W/m/K | |
| Service Temperature | -55 to 260 | °C |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Linear Shrinkage | 0.20 to 0.50 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 20 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 3.70 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 0.020 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (25°C) | 26 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | Red | ||
| Density | 1.43 | g/cm³ | |
| Viscosity | 20 to 30 | Pa·s | ASTM D2393 |
| Curing Time (25°C) | 24 | hr |
| Note Message | |
|---|---|
| 1 . | Die B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANCOMP PP BN140 T5 | Polykemi AB | PP, Unspecified | SCANCOMP PP |
| Moplen HP548R | LyondellBasell Industries | PP Homopolymer | Moplen |
| TRYCITE™ 8002.600 | The Dow Chemical Company | PS (GPPS) | TRYCITE™ |
| CP PRYME® Nylon 66 NN133ZL | Chase Plastics Services Inc. | Nylon 66 | CP PRYME® Nylon 66 |
| Elastron® V V601.A60.N | Elastron USA, Inc. | TPV | Elastron® V |
