Order Products : sales@su-jiao.com

VECTOR® 4113

Category:	SIS , Styrene Isoprene Styrene Block Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OaRLW1_VECTOR-4113.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VECTOR 4113 Styrene-Isoprene-Styrene/Styrene-Isoprene (SIS/SI) Block Copolymer SIS triblock / SI diblock (SIS/SI)(1) copolymer blend. Contains ~18% SI diblock copolymer. Low styrene, low viscosity, low modulus copolymer. Outstanding thermal stability and melt processability. Supplied as a dense pellet, dusted with talc. VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information. VECTOR 4113 is a blend of linear, pure styrene-isoprene-styrene triblock and pure styrene-isoprene diblock copolymer. The individual components are produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite). It is a soft SIS/SI block copolymer blend. It is softer than VECTOR 4111A pure triblock copolymer due to the presence of ~18% SI diblock. It is well-suited for use in formulating adhesives.

Message

VECTOR 4113
Styrene-Isoprene-Styrene/Styrene-Isoprene (SIS/SI) Block Copolymer

SIS triblock / SI diblock (SIS/SI)(1) copolymer blend.

Contains ~18% SI diblock copolymer.

Low styrene, low viscosity, low modulus copolymer.

Outstanding thermal stability and melt processability.

Supplied as a dense pellet, dusted with talc.

VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.

VECTOR 4113 is a blend of linear, pure styrene-isoprene-styrene triblock and pure styrene-isoprene diblock copolymer. The individual components are produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).

It is a soft SIS/SI block copolymer blend. It is softer than VECTOR 4111A pure triblock copolymer due to the presence of ~18% SI diblock. It is well-suited for use in formulating adhesives.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer Food Contact Acceptable Good Processability Good Thermal Stability Low Viscosity Soft
Uses	Adhesives
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	1.0	g/10 min	ASTM D1238
Solution Viscosity	1200	mPa·s	ASTM D2196
Ash Content	0.3	wt%	ASTM D1416
Styrene Content	15.0	wt%	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	18.0	wt%	Internal Method
Volatiles	0.2	wt%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	31		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(300% Strain, 25°C)	1.10	MPa	ASTM D412
Tensile Strength ²(Yield, 25°C)	24.8	MPa	ASTM D412
Tensile Elongation ³(Break, 25°C)	1300	%	ASTM D412

Note Message
1 .	25 Wt. % in toluene
2 .	25 Wt. % in toluene
3 .	25 Wt. % in toluene

Resin Grade	Manufacturer	Category	Trademark
RTP 4203	RTP Company	PI, TP	RTP
Borealis PE MG7547S	Borealis AG	HDPE	Borealis PE
ESTOPLAST EP 4000	Ester Industries Ltd.	PBT	ESTOPLAST EP
LONGLITE® PMC T651	CCP Group	Phenolic	LONGLITE® PMC
Sylvin 3230-75 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin