Order Products : sales@su-jiao.com
Polybutene-1 PB 0110M
| Category: | PB , Polybutylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Polybutene-1 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OZEPsD_Polybutene-1-PB-0110M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polybutene-1 grade PB 0110M is a semi-crystalline homopolymer, which is used where creep, environmental stress crack resistance and elevated temperature performance are key requirements. This polymer is highly compatible with polypropylene due to its similar molecular structure. It can be used to improve mechanical properties at elevated temperatures. It is less compatible in blends with polyethylene but it is still easily dispersible. It forms a 2-phase structure which is the basis of seal peel technology for easy-opening packaging applications. Its relatively slow kinetics of crystallization allow for an excellent wetting behavior. Its highly shear-sensitive flow behavior means that it remains easily dispersible also in even more incompatible polymers like thermoplastic elastomers. Foodlaw compliance information about this product can be found in separate product documentation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.914 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/10.0 kg | 12 | g/10 min | ISO 1133 |
| 190°C/2.16 kg | 0.40 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 8986-2 | ||
| Yield | 19.5 | MPa | ISO 8986-2 |
| Fracture | 35.0 | MPa | ISO 8986-2 |
| Tensile Strain 1(Break) | 300 | % | ISO 8986-2 |
| Flexural Modulus | 450 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | DSC | ||
| -- 2 | 117 | °C | DSC |
| -- 3 | 128 | °C | DSC |
| Additional Information |
|---|
| Tm2 corresponds with the melting point of crystalline form 2 which is measured immediately after solidification. Tm2 corresponds with the melting point available for each batch on the Certificate of Analysis (COA). |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 190 - 230 | °C |
| Extrusion instructions |
|---|
| Recommended processing temperatures: 190°C to 230°C In cases were higher temperatures are required please contact your appropriate technical contact for support. |
| Note Message | |
|---|---|
| 1 . | Measured on specimens conditioned for 10 days at 20°C |
| 2 . | Tm2 |
| 3 . | Tm1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AZDEL™ C200B01N | Azdel, Inc. | PP Alloy | AZDEL™ |
| Desmoderm® 43191 | Covestro - PUR | PUR-Ether | Desmoderm® |
| EcoPaXX® Q-HG6 | DSM Engineering Plastics | Nylon 410 | EcoPaXX® |
| POLYCASA® ACRYL KR 2008/1 | Polycasa | Acrylic (PMMA) | POLYCASA® ACRYL |
| LEXAN™ HF1110 resin | SABIC Innovative Plastics | PC | LEXAN™ |
