Order Products : sales@su-jiao.com
WINTEC™ WFX6
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Japan Polychem Corporation |
| Trademark: | WINTEC™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OVgvv8_WINTEC-WFX6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WINTEC™ WFX6 is a Polypropylene Random Copolymer (PP Random Copolymer) product. It is available in Asia Pacific. Typical application: Film. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 2.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 to 1.4 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 70 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 750 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 22.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | > 400 | % | ISO 527-2 |
| Flexural Modulus | 700 | MPa | ISO 178 |
| Flexural Stress | 25.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | ISO 179 | ||
| 0°C | 3.0 | kJ/m² | |
| 23°C | 11 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 70.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 110 | °C | ISO 306 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Gloss | 90 | ASTM D523 | |
| Haze | ISO 14782 | ||
| 1000 µm | 25 | % | |
| 2000 µm | 75 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYTROPE® TPP 512 | A. Schulman Inc. | TPO (POE) | POLYTROPE® |
| Trexprene® A50NI-HF | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| Elastron® G P.G300.A36.N | Elastron USA, Inc. | SEBS | Elastron® G |
| LEXAN™ ML6413 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Luran® S 777ME | Styrolution | ASA | Luran® S |
