Order Products : sales@su-jiao.com
Nylfor® A2 FR2/3A NATURALE
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Nylfor® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ONm2aP_Nylfor-A2-FR2-3A-NATURALE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nylfor® A2 FR2/3A NATURALE is a Polyamide 66 (Nylon 66) material. It is available in Europe, Latin America, or North America for injection molding. Important attributes of Nylfor® A2 FR2/3A NATURALE are:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Molding Shrinkage | 0.85 | % | Internal Method |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 7.5 | % | |
| Equilibrium, 23°C, 50% RH | 2.2 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3650 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 67.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 8.0 | % | ASTM D638 |
| Flexural Modulus | 3200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 4.5 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact (23°C) | 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | ||
| 3.20 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 260 | °C | |
| Middle Temperature | 270 | °C | |
| Front Temperature | 280 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® C4740 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Sofprene T® 550100A70 | SO.F.TER. SPA | SBS | Sofprene T® |
| DURACON® EB-08 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| Hypro® PPH-CC40 NATURAL | Entec Polymers | PP Homopolymer | Hypro® |
| Plaslube® PA6/6 GF13 TL10 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
