Order Products : sales@su-jiao.com
DynaMix™ 3204-HF
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Polymer Dynamix |
| Trademark: | DynaMix™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OLOIob_DynaMix-3204-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Modified PEEK Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 79.3 | MPa | |
| Break | 80.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 5.0 to 6.0 | % | |
| Break | 20 to 30 | % | |
| Flexural Modulus | 3450 | MPa | ASTM D790 |
| Flexural Strength | 138 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 91 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Rear Temperature | 332 to 360 | °C | |
| Middle Temperature | 338 to 366 | °C | |
| Front Temperature | 343 to 377 | °C | |
| Nozzle Temperature | 343 to 377 | °C | |
| Processing (Melt) Temp | 343 to 377 | °C | |
| Mold Temperature | 177 to 204 | °C | |
| Injection Rate | Moderate | ||
| Screw Speed | 40 to 70 | rpm | |
| Clamp Tonnage | 4.1 to 6.9 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRP8608A | Teknor Apex Asia Pacific PTE. LTD. | PVC, Rigid | Sinvicomp |
| SLOVALEN® PH 66 GF 30 FRO 4 | Plastcom | PP Homopolymer | SLOVALEN® |
| Xuchuan A-9088A/B-6088 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| HANWHA LDPE 5310 | Hanwha Chemical | LDPE | HANWHA LDPE |
| Sylvin 8925-90 White 1423 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
