Order Products : sales@su-jiao.com
Plavis® ESD
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Comco Nylon GmbH |
| Trademark: | Plavis® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OIYEuN_PlavisESD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PLAVIS is a super engineering plastic. PLAVIS polyimide has a unique chemical structure with some of the highest properties availiable. Nitrogen bonded to 3 carbons is the critical part of the chain and imparts the plastic with remarkable features and benefits. DAELIM makes PLAVIS isostatic molded rods have uniform properties in all directions. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, Compression Molded) | 90 - 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D1708 | ||
| Fracture, 23°C | 83.3 | MPa | ASTM D1708 |
| Fracture, 260°C | 39.2 | MPa | ASTM D1708 |
| Tensile Elongation 2 | ASTM D1708 | ||
| Fracture, 23°C | 7.0 | % | ASTM D1708 |
| Fracture, 260°C | 6.0 | % | ASTM D1708 |
| Flexural Modulus (23°C, Compression Molded) | 3430 | MPa | ASTM D790 |
| Flexural Strength (23°C, Compression Molded) | 108 | MPa | ASTM D790 |
| Compressive Modulus 3 | 2450 | MPa | ASTM D695 |
| Compressive Strength 4 | ASTM D695 | ||
| 1% strain, 23°C | 24.5 | MPa | ASTM D695 |
| 10% strain, 23°C | 147 | MPa | ASTM D695 |
| Coefficient of Friction 5 | 0.32 | ||
| Wear Rate | 33 | mm/sec |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity 6(25°C) | 0.37 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 7 | 1.0E+6 - 1.0E+9 | ohms | ASTM D257 |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | Compression Molded |
| 3 . | Compression Molded |
| 4 . | Compression Molded |
| 5 . | Compression Molded |
| 6 . | Compression Molded |
| 7 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx P63E0 | The Matrixx Group, Inc. | Nylon 6 | Matrixx |
| TECHNOGRAN® PPO GF FR BLK | Eurocompound Polymers | Polyolefin, Unspecified | TECHNOGRAN® |
| ExxonMobil™ HDPE HMA 025 | ExxonMobil Chemical | HDPE, UHMW | ExxonMobil™ HDPE |
| DynaChar™ 3544 | Polymer Dynamix | Polyolefin, Unspecified | DynaChar™ |
| Hyflon® PFA M620 | Solvay Specialty Polymers | PFA | Hyflon® PFA |
