Order Products : sales@su-jiao.com
Spartech Polycom SCR1F-4009U
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OHWwwz_Spartech-Polycom-SCR1F-4009U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SCR1F-4009U is a medium viscosity, flame retardant, ABS resin for injection molding that contains a UV stabilizer. It is heat stabilized and lubricated for good processing characteristics, and it exhibits good impact and chemical resistance. With the benefit of low moisture absorption, ABS can be used in a variety of environments. Being a very versatile product, SCR1F-4009U can be used for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 39.3 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 87.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm, NC) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 179 - 204 | °C | |
| Middle Temperature | 193 - 210 | °C | |
| Front Temperature | 204 - 221 | °C | |
| Nozzle Temperature | 193 - 232 | °C | |
| Processing (Melt) Temp | 193 - 232 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Qenos PE HD0494 | Qenos Pty Ltd | HDPE | Qenos PE |
| Sinpolene MBW1781 | Teknor Apex Asia Pacific PTE. LTD. | LLDPE | Sinpolene |
| Trademark PP PPC5020MA | Trademark Plastics Corporation | PP Impact Copolymer | Trademark PP |
| NEXT SIGNATURE CA NG-100 | NEXT Specialty Resins, Inc. | CA | NEXT SIGNATURE |
| PEARLSTICK® D40-70/18 | Lubrizol Advanced Materials, Inc. | TPU-Polyester | PEARLSTICK® |
