Order Products : sales@su-jiao.com
Osterlene® LD-1-919
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Osterman & Company |
| Trademark: | Osterlene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OGZWMZ_Osterlene-LD-1-919.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LD-1-919 is a series of resins designed for a wide variety of industrial film applications where high impact strength and excellent drawdown are needed. LD-1-919 exhibits good uniformity, ease of processing and good tensile strength. LD-1-919 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 14.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 660 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - MD | 200 | MPa | ASTM D882 |
| Tensile Strength - MD (Yield) | 24.1 | MPa | ASTM D882 |
| Tensile Elongation - MD (Yield) | 200 | % | ASTM D882 |
| Dart Drop Impact 1 | 120 | g | ASTM D1709 |
| Elmendorf Tear Strength - MD | 300 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Product LD-1-919: Slip - None, Antiblock - NoneProduct LD-1-919-SMAL: Slip - Medium, Antiblock - LowProduct LD-1-919-AM: Slip - None, Antiblock - MediumThe value shown as Secant Modulus, ASTM D882, was tested in accordance with ASTM E111. |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sarlink® TPV 2455 | Teknor Apex Company | TPV | Sarlink® TPV |
| Novablend™ 2677 | PolyOne Corporation | PVC, Rigid | Novablend™ |
| AXELERON™ CS L-3364 NT CPD | The Dow Chemical Company | HDPE | AXELERON™ |
| Kingfa FRHIPSV-0 | Kingfa | PS (HIPS) | Kingfa |
| KOPA® KN333G50BL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
