Order Products : sales@su-jiao.com
Durepol® PBT A3 G20 NTLA010 BT308
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Durepol® PBT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | OGWY2Y_Durepol-PBT-A3-G20-NTLA010-BT308.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyester PBT reinforced with 20% fiberglass, excellent mechanical and thermal properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 1.0 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 117 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.3 | % | ASTM D638 |
| Flexural Modulus | 7480 | MPa | ASTM D790 |
| Flexural Strength | 140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 204 | °C | ASTM D648 |
| Vicat Softening Temperature | 212 | °C | ASTM D1525 |
| Melting Temperature | 220 to 230 | °C | ASTM D2117 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | ASTM D257 |
| Dielectric Strength | 17 | kV/mm | ASTM D149 |
| Dissipation Factor (1 kHz) | 2.0E-3 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 | |
| Glow Wire Ignition Temperature (3.00 mm) | 750 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 30.0 to 130 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AN0320SN02 | Ginar Technology Co., LTD. | Nylon 6 | Mapex |
| Radilon® S 38F 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| DOWLEX™ NG 2429.01G | The Dow Chemical Company | LLDPE | DOWLEX™ |
| HiFill® POM 0212 B | Techmer Engineered Solutions | Acetal (POM) Copolymer | HiFill® |
| LIHAN® D9000 | Nanjing Lihan Chemical Co., Ltd. | Nylon 12 | LIHAN® |
