Amodel® AT-1116 HS Datasheet,PPA,Solvay Specialty Polymers-SHANGHAI SUSHENG

Message
Amodel AT- 1116 HS is a 16% glass fiber reinforced polyphthalamide (PPA) toughened heat stable resin specially designed to meet high cost-effective products requiring high rigidity, high dimensional stability, chemical resistance and ductility. It has high thermal deformation temperature and high bending elastic modulus. The elongation at break is higher than that of non-toughened glass fiber reinforced PPA. Conventional applications include bearings, bearing cages/bearing covers, housings, components for chemical processing equipment, motor frames, sports equipment, lawn and gardening equipment, and components that require crimping or snap assembly. -Black: AT-1116 HS BK 324 natural color: AT-1116 HS NT

General Information
Filler / Reinforcement	Glass fiber reinforced material, 16% filler by weight
Additive	Impact modifier heat stabilizer
Features	Good dimensional stability Impact modification Good chemical resistance Heat resistance, high Thermal Stability
Uses	Industrial components Industrial application Machine/mechanical parts Metal substitution Connector Parts under the hood of a car Automotive Electronics Application in Automobile Field General spool Bearing
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.28	--	g/cm³	ISO 1183/A
Molding Shrinkage				ASTM D955
Flow	0.60	--	%	ASTM D955
Transverse flow	0.60	--	%	ASTM D955
Water Absorption (24 hr)	0.20	--	%	ASTM D570

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus
--	6480	7100	MPa	ASTM D638
23°C	6890	--	MPa	ISO 527-2
100°C	6690	--	MPa	ISO 527-2
Tensile Stress
Fracture, 23°C	160	--	MPa	ISO 527-2
Fracture, 100°C	65.5	--	MPa	ISO 527-2
--	161	131	MPa	ASTM D638
Tensile Elongation
Fracture	3.8	2.8	%	ASTM D638
Fracture, 23°C	3.7	--	%	ISO 527-2
Fracture, 100°C	4.2	--	%	ISO 527-2
Flexural Modulus
--	6000	6210	MPa	ASTM D790
23°C	6690	--	MPa	ISO 178
100°C	4960	--	MPa	ISO 178
Flexural Strength
--	226	201	MPa	ASTM D790
23°C	197	--	MPa	ISO 178
100°C	141	--	MPa	ISO 178
Compressive Strength	124	--	MPa	ASTM D695
Shear Strength	69.6	65.5	MPa	ASTM D732

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	9.0	--	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	86	--	kJ/m²	ISO 179/1eU
Notched Izod Impact
--	96	48	J/m	ASTM D256
23°C	8.0	--	kJ/m²	ISO 180/1A
Unnotched Izod Impact
--	960	800	J/m	ASTM D256
23°C	53	--	kJ/m²	ISO 180/1U
Instrumented Dart Impact				ASTM D3763
Energy at Maxumum Load ¹	--	1.36	J	ASTM D3763
Total Energy	--	7.59	J	ASTM D3763
Total energy	10.0	--	J	ASTM D3763
Maximum load energy ²	1.76	--	J	ASTM D3763

Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
0.45 MPa, annealed	268	--	°C	ASTM D648
1.8 MPa, not annealed	258	--	°C	ISO 75-2/A
1.8 MPa, annealed	254	--	°C	ASTM D648
Peak Melting Temperature	310	--	°C	ASTM D3418
Linear thermal expansion coefficient				ASTM E831
Flow : 0 to 100°C	2.2E-5	--	cm/cm/°C	ASTM E831
Flow : 100 to 200°C	1.6E-5	--	cm/cm/°C	ASTM E831
Lateral : 0 to 100°C	7.5E-5	--	cm/cm/°C	ASTM E831
Lateral : 100 to 200°C	1.2E-4	--	cm/cm/°C	ASTM E831

Injection	Dry	Unit
Drying Temperature	110	°C
Drying Time	4.0	hr
Suggested Max Moisture	0.045	%
Rear Temperature	304 - 318	°C
Front Temperature	316 - 329	°C
Processing (Melt) Temp	321 - 343	°C
Mold Temperature	135	°C

Injection instructions
Storage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide.

Injection instructions

Storage: Amodel® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Amodel® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Amodel® processing guide.

Note Message
1 .	Maximum Load: 200 lb (890 N)
2 .	Maximum load: 240 lb (1070 N)

Category:	PPA , Polyphthalamide
Manufacturer:	Solvay Specialty Polymers
Trademark:	Amodel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	OG4gxK_Amodel-AT-1116-HS.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
THERMOLAST® K TC3MSZ (Series: AD1)	KRAIBURG TPE	TPE	THERMOLAST® K
TOTAL Polypropylene PPR 3727WZ	TOTAL Refining & Chemicals	PP Random Copolymer	TOTAL Polypropylene
ALCOM® ABS 530/29 SV1217-04MCO	ALBIS PLASTIC GmbH	ABS	ALCOM® ABS
Devlon UHMWPE	Devol® Engineering Polymers	UHMWPE	Devlon
Durolon® V2602	Unigel Plásticos	PC	Durolon®