Order Products : sales@su-jiao.com

MERICAN® 30-200P

Category:	Vinyl Ester , Vinyl Ester
Manufacturer:	Huachang Polymer Co., Ltd.
Trademark:	MERICAN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	O7gqlN_MERICAN-30-200P.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

EPOXY VINYL ESTER RESIN (VARIM)

MERICAN® 30-200P is a low-viscosity, prepromoted, high performance epoxy vinyl ester resin. It owns excellent properties both in mechanical and processing, fatigue resistance. MERICAN 30-200P is suitable for Vacuum Infusion Process.

PROPERTY

Low-viscosity

Shorter geltime drift, good storage stability

Low peak exotherm, thick pieces can be formed at one time

Good curing properties, thoroughly curing for thin pieces

Excellent mechanical properties, good adhesion between laminates

Resistant to fatigue, aging and corrosion

APPLICATION

Suitable for the fabricatiion of composites products with high performance and complex structure, especially large windmill blades and yachts, etc.

Suitable for vacuum infusion process

General Information
Features	Fatigue Resistant Good Adhesion Good Corrosion Resistance Low Exotherm Low Viscosity
Uses	Compounding Engineering Parts
Appearance	Light Green
Processing Method	Vacuum Forming

Physical	Nominal Value	Unit	Test Method
Solids Content	52 to 56	%

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (80°C)	> 2	day

Thermoset	Nominal Value	Unit
Gel Time (25°C)	> 2.0	hr

Additional Information	Nominal Value	Unit
Peak Exotherm ¹(25°C)	80 to 130	°C

Hardness	Nominal Value	Unit	Test Method
Barcol Hardness	40		ASTM D2583

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3400	MPa	ASTM D638
Tensile Strength	90.0	MPa	ASTM D638
Tensile Elongation (Break)	5.0	%	ASTM D638
Flexural Modulus	3400	MPa	ASTM D790
Flexural Strength	140	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	110	°C	ASTM D648

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity (25°C)	100 to 200	cP

Note Message
1 .	100 gm

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer KE-2090-10A/B	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
Badamid® LB70 GF35	Bada AG	Nylon 6	Badamid®
Dryflex® 4050	ELASTO	TPE	Dryflex®
Ferro PP LPP20BC77BK	Ferro Corporation	PP Homopolymer	Ferro PP
FERREX® GPP20CC61HB RED	Ferro Corporation	PP Homopolymer	FERREX®