Order Products : sales@su-jiao.com
SMOKEGUARD™ V 1116
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ V |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O6fiYi_SMOKEGUARD-V-1116.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LOW SMOKE, HIGHLY FLAME RETARDED, 75°C DEGREE, LEAD FREE SMOKEGUARD JACKETING COMPOUND FOR PLENUM CABLE CONSTRUCTIONS. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 - 1.59 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 67 - 73 | ASTM D2240 | |
| Shaw D, 15 seconds | 53 - 59 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D412 | ||
| 0.381 mm | 17.2 | MPa | ASTM D412 |
| 1.91 mm | 15.2 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Fracture, 1.91mm | 210 | % | ASTM D412 |
| Fracture, 0.381mm | 190 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -6.00 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 3.50 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.018 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 50 | % | ASTM D2863 |
| Smoke | 3.0 | % | ASTM D4100 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Extruder Screw Compression Ratio | 3.0:1.0 | ||
| Cylinder Zone 1 Temp. | 154 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 166 | °C | |
| Cylinder Zone 4 Temp. | 168 | °C | |
| Cylinder Zone 5 Temp. | 171 | °C | |
| Adapter Temperature | 171 | °C | |
| Melt Temperature | 185 - 191 | °C | |
| Die Temperature | 171 | °C |
| Extrusion instructions |
|---|
| Melt temperature is critical, at elevated temperatures foaming may occur. Material should be dried prior to use. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP5120F B2 | Spartech Polycom | PP, Unspecified | Spartech |
| FLEXITEQ™ F60A111UV | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| Hipolyene 1533 NM | Zylog Plastalloys | TPO (POE) | Hipolyene |
| PENTAMID A GV15 MK15 H RC schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| ESTOPLAST EP 2130BB12 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
