Order Products : sales@su-jiao.com
ESTACARB PC 2020 GF V0 HF
| Category: | PC , Polycarbonate |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTACARB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O5fmUl_ESTACARB-PC-2020-GF-V0-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ESTACARB PC 2020 GF V0 HF is a polycarbonate (PC) product that contains 10% glass fiber reinforcement. It is available in Europe. ESTACARB PC 2020 GF V0 HF applications include electrical/electronic applications and engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 64.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 3.5 | % | ASTM D638 |
| Flexural Modulus | 3600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C | 70 | J/m | ASTM D256 |
| 23°C | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 150 | °C | ASTM D1525 1 |
| -- | 147 | °C | ASTM D1525 2 |
| Ball Indentation Temperature | 135 | °C | IEC 60598-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | UL 94 | |
| 3.20 mm | V-0 | UL 94 | |
| Glow Wire Ignition Temperature | 960 | °C | IEC 60695-2-13 |
| Additional Information |
|---|
| Note: Ball Indention Temperature, IEC 60598-1 was tested in accordance with IEC 695-1-2.Ball Pressure Test, IEC 335-1, 105°C: yes |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 250 - 270 | °C | |
| Mold Temperature | 60.0 - 90.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Injection Pressure: Medium |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| 2 . | 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 1345 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| Novalloy-E E11 | Daicel Polymer Ltd. | ABS | Novalloy-E |
| Badamid® UL B70 | Bada AG | Nylon 6 | Badamid® |
| GAPEX® RPP20EU76WH | Ferro Corporation | PP, Unspecified | GAPEX® |
| PENTAMID A GV25 H UV natural | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
