Order Products : sales@su-jiao.com
Greene FKM 929
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | Greene FKM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | O5azEP_Greene-FKM-929.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Greene FKM 929 is a Fluoroelastomer product. It is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 97 | ||
| Shore D | 65 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 18.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 26 | % | ASTM D412 |
| Compression Set 1 | ASTM D395 | ||
| 100°C, 70 hr | 34 | % | |
| 177°C, 70 hr | 51 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | ASTM D573 | ||
| 100°C, 70 hr | -10 | % | |
| 177°C, 70 hr | -5.0 | % | |
| Change in Ultimate Elongation in Air | ASTM D573 | ||
| 100°C, 70 hr | 11 | % | |
| 177°C, 70 hr | -9.0 | % | |
| Change in Durometer Hardness in Air | ASTM D573 | ||
| Shore A, 100°C, 70 hr | 0.0 | ||
| Shore D, 100°C, 70 hr | -3.0 | ||
| Shore A, 177°C, 70 hr | 0.0 | ||
| Shore D, 177°C, 70 hr | -4.0 | ||
| Change in Tensile Strength | ASTM D471 | ||
| 100°C, 70 hr, in ASTM #1 Oil | -2.0 | % | |
| 100°C, 70 hr, in ASTM #3 Oil | -4.8 | % | |
| 177°C, 70 hr, in ASTM #3 Oil | -11 | % | |
| Change in Ultimate Elongation | ASTM D471 | ||
| 100°C, 70 hr, in ASTM #1 Oil | 11 | % | |
| 100°C, 70 hr, in ASTM #3 Oil | 8.6 | % | |
| 177°C, 70 hr, in ASTM #3 Oil | 23 | % | |
| Change in Durometer Hardness | ASTM D471 | ||
| Shore A, 100°C, 70 hr, in ASTM #1 Oil | 0.0 | ||
| Shore D, 100°C, 70 hr, in ASTM #1 Oil | -5.0 | ||
| Shore A, 100°C, 70 hr, in ASTM #3 Oil | 0.0 | ||
| Shore D, 100°C, 70 hr, in ASTM #3 Oil | -5.0 | ||
| Shore A, 177°C, 70 hr, in ASTM #3 Oil | -1.0 | ||
| Shore D, 177°C, 70 hr, in ASTM #3 Oil | -7.0 | ||
| Change in Volume | ASTM D471 | ||
| 100°C, 70 hr, in ASTM Oil #1 | 0.80 | % | |
| 100°C, 70 hr, in ASTM Oil #3 | 1.1 | % | |
| 177°C, 70 hr, in ASTM Oil #3 | 3.2 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -29 to 204 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rubber Classification 2 | FKM | ||
| Tear Strength - Die C | 41.2 | kN/m | ASTM D624 |
| Note Message | |
|---|---|
| 1 . | 25% Deflection |
| 2 . | ASTM D1418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultra Low Outgassing™ SCV1-2599 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| Epolene® E-14EP | Westlake Chemical Corporation | LDPE | Epolene® |
| Heraflex® A 90-11-44 UV | Radici Plastics | SEBS | Heraflex® |
| Luranyl® HT 200 | ROMIRA GmbH | PPE+Nylon 66 | Luranyl® |
| MAJORIS GE360 | AD majoris | PP, Unspecified | MAJORIS |
