Sarlink® TPE ME-2685B (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
The Sarlink ME-2600 Series is a super high flow high performance thermoplastic elastomer series, available in BLK, designed for automotive exterior molded applications, including window encapsulation. Sarlink ME-2685B is a higher hardness, low density, resilient, UV stabilized, super high flow injection molding grade delivering excellent aesthetics with good adhesion to glass with primer.

General Information
Features	Low Specific Gravity Excellent appearance Low density Good UV resistance Workability, good Good adhesion High liquidity Good chemical resistance Elastic Medium hardness
Uses	Car window package Application in Automobile Field Automotive exterior parts Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.938	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	31	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
1 second, injection molding	84	ISO 868
5 seconds, injection molding	82	ISO 868
15 seconds, injection molding	80	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ISO 37
Transverse flow : 100% strain	3.70	MPa	ISO 37
Flow : 100% strain	4.40	MPa	ISO 37
Tensile Strength			ISO 37
Transverse flow : Fracture	12.7	MPa	ISO 37
Flow : Fracture	11.3	MPa	ISO 37
Tensile Elongation			ISO 37
Transverse flow : Fracture	770	%	ISO 37
Flow : Fracture	680	%	ISO 37
Tear Strength			ISO 34-1
Transverse flow	41	kN/m	ISO 34-1
Flow	39	kN/m	ISO 34-1
Compression Set			ISO 815
23°C, 22 hr	32	%	ISO 815
70°C, 22 hr	50	%	ISO 815
90°C, 70 hr	68	%	ISO 815

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air - Across Flow			ISO 188
110°C, 1008 hr	-3.1	%	ISO 188
125°C, 168 hr	-7.1	%	ISO 188
Changes in tensile stress upon fracture in air- Transverse flow			ISO 188
110°C, 1008 hr	1.0	%	ISO 188
125°C, 168 hr	-3.5	%	ISO 188
Change in Shore Hardness in Air			ISO 188
Shao A, 110°C, 1008 hr	1.7		ISO 188
Shao A, 125°C, 168 hr	1.8		ISO 188

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	140	Pa·s	ASTM D3835

Additional Information
Good adhesion to glass with primer

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	170 - 190	°C
Middle Temperature	175 - 195	°C
Front Temperature	180 - 205	°C
Nozzle Temperature	180 - 205	°C
Processing (Melt) Temp	180 - 205	°C
Mold Temperature	15 - 40	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 176°F (80°C).

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	O0hhKm_SarlinkTPEME2685BPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Unichem 8818	Colorite Polymers	PVC, Unspecified	Unichem
Utomer UT380	Shanghai Utomer Material Science Co., Ltd.	TPU-Polyester	Utomer
FLEXITEQ™ F50D010UV	Marplex Australia Pty. Ltd.	TPV	FLEXITEQ™
Kingfa APO-3012	Kingfa	PP, Unspecified	Kingfa
Hostalen PP H2250 36	LyondellBasell Industries	PP Homopolymer	Hostalen PP