Order Products : sales@su-jiao.com
Sumitomo Epoxy E 8353-706R-1
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Nzydix_Sumitomo-Epoxy-E-8353-706R-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| E 8353-706R-1 is a fiberglass and mineral reinforced epoxy molding compound, with excellent dimensional stability and good strength at elevated temperatures. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.98 | g/cm³ | ASTM D792 |
| Apparent Density | 0.90 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (Compression Molded) | 0.25 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.20 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 78.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 18000 | MPa | ASTM D790 |
| Flexural Strength (Break) | 120 | MPa | ASTM D790 |
| Compressive Strength | 250 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 22 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed, Compression Molded | > 282 | °C | |
| 1.8 MPa, Annealed, Compression Molded | > 282 | °C | |
| CLTE | ASTM E831 | ||
| Flow | 2.2E-5 | cm/cm/°C | |
| Transverse | 2.7E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | |||
| -- | 18 | kV/mm | ASTM D149 |
| -- | 14 | kV/mm | ASTM D149 |
| -- | 15 | kV/mm | ASTM D149 |
| Dielectric Constant 1(1 MHz) | 4.40 | ASTM D2520 | |
| Dissipation Factor 2(1 MHz) | 0.019 | ASTM D150 | |
| Arc Resistance | 180 | sec | ASTM D495 |
| Note Message | |
|---|---|
| 1 . | Wet |
| 2 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mineralblend® PP-1450 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP Copolymer | Mineralblend® |
| STATEX® 31 | ITW FORMEX | PP, Unspecified | STATEX® |
| Supering RP 520 - GMP | UNIFLON | PTFE | Supering |
| SuperLite® SL551200-100 (2.0mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| FERREX® GPP40CC | Ferro Corporation | PP, Unspecified | FERREX® |
