Order Products : sales@su-jiao.com
ESTABLEND CR
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTABLEND |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NyWkef_ESTABLEND-CR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ESTABLEND CR is a Polycarbonate + ABS (PC+ABS) product. It is available in Europe. Typical application: Coating Applications. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 40.0 | MPa | |
| Break | 32.0 | MPa | |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 2000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 340 | J/m | |
| 0°C | 410 | J/m | |
| 23°C | 450 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 123 | °C | ASTM D1525 1 |
| -- | 110 | °C | ASTM D1525 2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| 2 . | Rate A (50°C/h), Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polyvel PLA CT-L02 PLA Melt Strength Enhancer | Polyvel Inc. | PLA | Polyvel PLA |
| ACCUTECH™ ABS892EV | ACLO Compounders Inc. | ABS | ACCUTECH™ |
| JSR EPR EP503EF | JSR Corporation | EPDM | JSR EPR |
| RTP 199 X 139046 | RTP Company | PP, Unspecified | RTP |
| Stanyl® HFX82S | DSM Engineering Plastics | Nylon 46 | Stanyl® |
