Order Products : sales@su-jiao.com
Mecoline S TP 1028
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NyHoqW_Mecoline-S-TP-1028.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, thermoplastic, flame retardant compound for the sheathing of low and medium voltage cables in General Installation applications. The compound features a high line speed and good processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.50 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 12 | g/10 min | ISO 1133 |
| pH | > 4.5 | IEC 60754-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - penetration 6h at 80°C | 6.0 | % | DIN VDE 0472 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Conductivity | < 10.0 | µS/mm |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | 0 | % | IEC 754-1 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 160 to 180 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 47 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 10.9 | MPa | IEC 811-1-1 |
| Tensile Strain (Break) | 190 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 6.4 | % | IEC 811-1-2 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -18 | % | IEC 811-1-2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 36 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 110 to 130 | °C | |
| Cylinder Zone 2 Temp. | 120 to 140 | °C | |
| Cylinder Zone 3 Temp. | 130 to 150 | °C | |
| Cylinder Zone 4 Temp. | 140 to 160 | °C | |
| Cylinder Zone 5 Temp. | 150 to 170 | °C | |
| Adapter Temperature | 155 to 175 | °C | |
| Die Temperature | 160 to 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P85 | Nilit Plastics | Nylon 66 | POLYNIL® |
| MIDILENA I LDPE B20/0.3 | ROMPETROL PETROCHEMICALS S.R.L. | LDPE | MIDILENA I |
| Utomer UT81P85A | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyether | Utomer |
| Durethan® BM 40 X H2.0 EF 900116 | LANXESS GmbH | Nylon 6 | Durethan® |
| EPO-TEK® 730-110 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
