Order Products : sales@su-jiao.com
SureSpec HP-010
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Nwrlid_SureSpec-HP-010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SureSpec HP-010 is a certified prime grade Polypropylene specially designed for Extrusion of Water-Quench Cast Film for Slit Tape applications. HP-010 combines excellent processability, very good thermal stability and high degree of purity with Low Water carry-over and good balance of tape strength and orientation properties. Recommended processing temperatures of HP-010 are 1) tape-210°C to 220°C in barrel and 230-250°C in head and 2) multifilament - 210° to 230°C. HP-010 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use Polypropylene in contact and food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 101 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 33.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Injection Molded) | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 27 | J/m | ASTM D256A |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Processing Temperature | |||
| Multifilaments | 210 - 230 | °C | |
| Tape - in barrel | 210 - 220 | °C | |
| Tape - in head | 230 - 250 | °C | |
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stanyl® TE250F9 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| ASI POLYPROPYLENE PP 3503-01 | A. Schulman Inc. | PP Homopolymer | ASI POLYPROPYLENE |
| Horda E8472 | Horda Cable Compounds | PE, Unspecified | Horda |
| INEOS PP H03W-01 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| POLYfill PP TOUCH 25325 R3 | Polykemi AB | PP, Unspecified | POLYfill |
