Order Products : sales@su-jiao.com

Osterlene® LD1019SA

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Nw0pH7_OsterleneLD1019SA.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Osterlene LD1019 is a series of resins designed for a wide variety of industrial film app lications where high impact strength and excellent drawdown are needed.

LD1019 exhibits good uniformity, ease of processing and good tensile strength.

Osterlene LD1019 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Specific recommendations can be made only when the end use applications, properties and processing equipment are known. Consult your Osterman sales representative.

General Information
Additive	Anti-caking agent (1000 ppm) Sliding agent (500 ppm)
Features	smoothness Anti-caking property Impact resistance, high Workability, good Good stripping
Uses	Films Industrial application
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Density	0.919	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)	14.5	MPa	ASTM D638
Tensile Elongation (Break)	660	%	ASTM D638

Films	Nominal Value	Unit	Test Method
secant modulus			ASTM E111
MD	200	MPa	ASTM E111
TD	234	MPa	ASTM E111
Tensile Strength			ASTM D882
MD : Fracture	24.1	MPa	ASTM D882
TD : Fracture	16.5	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	200	%	ASTM D882
TD : Fracture	500	%	ASTM D882
Dart Drop Impact ¹	120	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD	300	g	ASTM D1922
TD	130	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	92.0	°C	ASTM D1525

Note Message
1 .	F50

Resin Grade	Manufacturer	Category	Trademark
Milastomer™ C700BM	Mitsui Chemicals America, Inc.	TPV	Milastomer™
TOTAL Polypropylene Lumicene® MR 10MX0	TOTAL Refining & Chemicals	PP Random Copolymer	TOTAL Polypropylene
NuSil MED1-4955	NuSil Technology	Silicone Rubber, LSR	NuSil
Cereplast Compostables® 5001	Cereplast, Inc.	PLA	Cereplast Compostables®
EL-Lene™ H555J	SCG Chemicals Co., Ltd.	HDPE	EL-Lene™