Order Products : sales@su-jiao.com
Pearlbond™ 580
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Pearlbond™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NvgH1y_Pearlbond-580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PEARLBOND® 580 : is a linear, Polyester-based TPU, supplied in form of white spherical granules with a very high crystallization rate and a very high thermoplasticity level. PEARLBOND® 580 : can be added to formulations of REACTIVE POLYURETHANE HOT-MELTS (HMPUR), in order to improve the crystallisation speed. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (20°C) | 1.19 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (170°C/2.16 kg) | 10 to 30 | g/10 min | ISO 1133 |
| Moisture Content | < 1500 | ppm | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Crystallization Rate | 14.0 to 18.0 | min | Internal Method |
| OH Value | < 3.00 | mg KOH/g | Internal Method |
| Thermoplasticity | Very High | Internal Method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 65.0 to 71.0 | °C | Internal Method |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (130°C) | 2700 | Pa·s | ISO 1133 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SN602G30 | RJM International, Inc. | Nylon 66 | RJM |
| SOLLAMID A 2700 FV | Krisoll Resinas Plásticas Ltda. | Nylon 66 | SOLLAMID |
| TECHLEN M1300 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| VENYL UN020 | AD majoris | Nylon 66 | VENYL |
| INSULCAST® RTVS 51 | ITW Polymers Coatings North America | Silicone Rubber, RTV-2 | INSULCAST® RTVS |
