Order Products : sales@su-jiao.com
Generic TPU-PC - Barium Sulfate
| Category: | TPU-PC , Thermoplastic Polyurethane Elastomer (PC Based) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NsFrd4_Generic-TPU-PC---Barium-Sulfate.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TPU-PC - Barium Sulfate This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 - 1.44 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.9 - 7.6 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.80 - 1.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 55 - 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 5.52 - 689 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 23°C | 4.14 - 20.8 | MPa | ASTM D412 |
| 300% strain, 23°C | 8.27 - 38.6 | MPa | ASTM D412 |
| Tensile Strength (Break, 23°C) | 34.1 - 51.7 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 350 - 530 | % | ASTM D412 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Post Cure Time | 8.0 | hr |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 54.4 - 54.6 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPU-PC - Barium SulfateThis information is provided for comparative purposes only. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 54.4 - 54.6 | °C | |
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 182 | °C | |
| Cylinder Zone 3 Temp. | 187 - 188 | °C | |
| Cylinder Zone 4 Temp. | 193 | °C | |
| Die Temperature | 204 | °C | |
| Back Pressure | 9.65 - 9.93 | MPa |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPU-PC - Barium SulfateThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® PP 423MT | Guangdong Silver Age Sci & Tech. Co., Ltd | PP, Unspecified | SILVER® |
| Fiberfil® PP-60/TC/40/OP WT2595 | Fiberfil® Engineered Plastics Inc. | PP Homopolymer | Fiberfil® |
| DOMAMID® 66G15FC | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| Globalene® PT511 | Lee Chang Yung Chemical Industry Corp. | PP Homopolymer | Globalene® |
| Loyblend® TA-1000 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PC+ABS | Loyblend® |
