Order Products : sales@su-jiao.com
SureSpec HD52-700
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NqR5Dr_SureSpec-HD52-700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD52-700 is a certified prime copolymer designed for injection molding applications requiring good balance of mechanical properties. HD52-700 features easy processability, good stiffness, good impact strength, high warpage resistance and excellent dimensional stability and is suitable for handling materials where resistance to low temperature impact and toughness is required. HD52-700 is not UV stabilized. Recommended processing temperature is 210 to 250°C. with mold @ 20 to 40°C. HD52-700 complies with FDA regulation 21CFR 177.1520 (c) 3.1 (a) + 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, molded, F50) | 10.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 1000 | % | ASTM D638 |
| Flexural Modulus 3 | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 56.7 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 75.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 250 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2102X0 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| DOW™ HDPE 35060A | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Anjacom® R050/75S Black 91010 | Almaak International GmbH | PC+ABS | Anjacom® |
| Caltex PP RE72 | GS Caltex | TPO | Caltex PP |
| Lucky Enpla LMA1003 | Lucky Enpla Co LTD | Acrylic (PMMA) | Lucky Enpla |
