Order Products : sales@su-jiao.com
EnCom PA/PPE290
| Category: | Nylon+PPE , Polyamide + PPE |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NowMy3_EnCom-PA-PPE290.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EnCom PA/PPE290 is a Polyamide + PPE (Nylon+PPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Typical application of EnCom PA/PPE290: Automotive |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (280°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.10 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 55.2 | MPa | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Flexural Strength | 86.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.18 mm | 143 | °C | |
| 1.8 MPa, Unannealed, 3.18 mm | 124 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ H15SQ9 | Marplex Australia Pty. Ltd. | PP Homopolymer | PROTEQ™ |
| Monprene® OM-16250-01 | Teknor Apex Company | TPE | Monprene® |
| ALCOM® PC 740/4 UV WT1082-08LD2 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| EMOPLEN® HP MTF 20 | EMAS Plastik San.Tic.AS. | PP Homopolymer | EMOPLEN® |
| Latamid H2 G/25-V0KB3 | LATI S.p.A. | Nylon 66 | Latamid |
