PELPRENE™ P90BD Datasheet,TPEE,TOYOBO America, Inc.-SHANGHAI SUSHENG

Message
PELPRENE™P90BD is a thermoplastic polyester elastomer (TPEE) product,. It is available in North America. Features include: flame retardant/rated flame high viscosity Wear-resistant

General Information
Features	Durability Viscosity, High
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.19	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow (2.00 mm)	1.1	%	ASTM D955
Water Absorption (Equilibrium, 23°C, 65% RH)	0.40	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	57		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	15.2	MPa	ASTM D638
Tensile Strength (Yield)	31.4	MPa	ASTM D638
Tensile Elongation (Break)	700	%	ASTM D638
Flexural Modulus	162	MPa	ASTM D790
Compressive Modulus	13.3	MPa	ASTM D695
Taber Abrasion Resistance (1000 Cycles)	13.0	mg	ASTM D1044

Elastomers	Nominal Value	Unit	Test Method
Tear Strength	172	kN/m	ASTM D624
Compression Set	57	%	ASTM D395

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	No Break		ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	101	°C	ASTM D648
Brittleness Temperature	-65.0	°C	ASTM D746
Vicat Softening Temperature	180	°C	ASTM D1525
Melting Temperature	203	°C	DSC
CLTE - Flow	1.4E-4	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	6.0E+13	ohms·cm	ASTM D257

Flammability	Nominal Value	Unit	Test Method
Flame Rating	HB		UL 94

Additional Information
Hardness, JIS K6301, A scale: 96Resilience, JIS K6301: 65 %Dielectric Strength, JIS K2111: 30 MV/mThe value listed as Compression Set, ASTM D395 was tested according to the JIS K6301 standard.The value listed as Brittle Point, ASTM D746 was tested according to the JIS K6301 standard.Coefficient of Linear Thermal Expansion, TMA: 14e-5 cm/cm/KCompression Modulus, ASTM D695, 10%: 13.3 MPaTensile Modulus, ASTM D638, 50% Modulus: 15.2 MPaThe value listed as Brittle Temp ASTM D746, was tested in accordance with JIS K6301.

Additional Information

Hardness, JIS K6301, A scale: 96Resilience, JIS K6301: 65 %Dielectric Strength, JIS K2111: 30 MV/mThe value listed as Compression Set, ASTM D395 was tested according to the JIS K6301 standard.The value listed as Brittle Point, ASTM D746 was tested according to the JIS K6301 standard.Coefficient of Linear Thermal Expansion, TMA: 14e-5 cm/cm/KCompression Modulus, ASTM D695, 10%: 13.3 MPaTensile Modulus, ASTM D638, 50% Modulus: 15.2 MPaThe value listed as Brittle Temp ASTM D746, was tested in accordance with JIS K6301.

Category:	TPEE , Thermoplastic Polyester Elastomer
Manufacturer:	TOYOBO America, Inc.
Trademark:	PELPRENE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Nm8VOh_PELPRENE-P90BD.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
RTP 205 AR 15 TFE 15	RTP Company	Nylon 66	RTP
THERMOLAST® K TC4CSZ (Series: CS)	KRAIBURG TPE	TPE	THERMOLAST® K
DOW™ LDPE 150E	The Dow Chemical Company	LDPE	DOW™ LDPE
NEMCON H PK DP110/X5	Ovation Polymers Inc.	PEEK	NEMCON H
FLEXCHEM™ 4553	Colorite Polymers	PVC, Flexible	FLEXCHEM™