Order Products : sales@su-jiao.com

DJSilicone NE-140

Category:	Silicone , Silicone
Manufacturer:	DONGJUE SILICONE (NANJING) CO., LTD
Trademark:	DJSilicone
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Nm53gN_DJSilicone-NE-140.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
This product could be divided into six types according to its hardness. After adding vulcanizator DMDBH, it has following properties: Excellent transparency, physical and mechanical properties, high and low temperature resistance, aging resistance and prolonged use at temperature from -60°C to 200°C. Suitable for making various kinds of keypad and parts for electronic products, accessories for machinery or cars, seal ring and parts for industrial or civil use. Different kinds of transparent, milky-white or vulcanized, colored fabrications are available.

Message

This product could be divided into six types according to its hardness. After adding vulcanizator DMDBH, it has following properties:
Excellent transparency, physical and mechanical properties, high and low temperature resistance, aging resistance and prolonged use at temperature from -60°C to 200°C.
Suitable for making various kinds of keypad and parts for electronic products, accessories for machinery or cars, seal ring and parts for industrial or civil use. Different kinds of transparent, milky-white or vulcanized, colored fabrications are available.

General Information
Features	Good Heat Aging Resistance High Clarity High Heat Resistance Low Temperature Resistant
Uses	Automotive Applications Electrical/Electronic Applications Industrial Applications Seals
Appearance	Clear/Transparent Colors Available White
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.08 to 1.18	g/cm³	ASTM D1505

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	38 to 42		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Set	< 6	%	ASTM D412
Tensile Strength (Yield)	> 6.50	MPa	ASTM D412
Tensile Elongation (Break)	> 400	%	ASTM D412
Tear Strength	> 19.0	kN/m	ASTM D624

Resin Grade	Manufacturer	Category	Trademark
Shinko-Lac® ABS SE-3	Mitsubishi Rayon America Inc.	ABS	Shinko-Lac®
UMG ALLOY® CV702	UMG ABS, Ltd.	ASA+PC	UMG ALLOY®
Mylar® MO 21 (750 guage)	DuPont Teijin Films U.S.	PET	Mylar®
LEXAN™ HP6 resin	SABIC Innovative Plastics	PC	LEXAN™
LUVOCOM® 50-0789	LEHVOSS Group	PC	LUVOCOM®