Order Products : sales@su-jiao.com
Andur 9 APLM/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NlhqxG_Andur-9-APLM-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 9-AP-LM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 88 to 91 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442, other diamines or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.22 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 91 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 6.72 | MPa | ASTM D412 |
| 300% strain | 12.1 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 59.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 560 | % | ASTM D412 |
| Compression Set | 24 | % | ASTM D395B |
| Bayshore Resilience | 38 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 6.0 - 8.0 | min | |
| Demold Time (100°C) | 30 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 89 to 92Die C Tear, ASTM D1004: 480 pliAverage Split Tear, ASTM D1938: 260 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 9 APLM: 180-212°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® Rx2635 | Covestro - Polycarbonates | PC | Makrolon® |
| Verolloy A2603 | PlastxWorld Inc. | ABS+Nylon | Verolloy |
| X-Pro PP 4212 | CTC Plastics, LLC | PP Copolymer | X-Pro |
| Chemical Resources PP 400 | Chemical Resources, Inc. | PP Homopolymer | Chemical Resources |
| LNP™ LUBRICOMP™ RAL22 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
