Order Products : sales@su-jiao.com
NuSil FS-3780
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NirPn3_NuSil-FS-3780.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: High Consistency Rubber Comment: Extrusion or Compression Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Peroxide | ||
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Translucent | ||
| Density | 1.44 | g/cm³ | |
| Curing Time (116°C) | 0.083 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 51 | ||
| Tensile Strength | 9.94 | MPa | |
| Tensile Elongation at Break | 300 | % | |
| Tear Strength | 23.6 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sunny® PA66 EN400 | Guangdong Shunde Shunyan New Material Co., Ltd. | Nylon 66 | Sunny® |
| Altuglas® BS 684 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| HiFill® PC GF30 | Techmer Engineered Solutions | PC | HiFill® |
| LUVOCOM® 1301/XCF/30 | Lehmann & Voss & Co. | PPS, Linear | LUVOCOM® |
| Dow Corning® MG 7-9800 | Dow Corning Corporation | Silicone | Dow Corning® |
