Order Products : sales@su-jiao.com
RTP 2700-43A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NhhuIG_RTP-2700-43A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.- |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.0 - 2.0 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.060 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 43 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 68.9 | MPa | ASTM D638 |
| Tensile Strength | 1.10 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Flexural Modulus | 68.9 | MPa | ASTM D790 |
| Flexural Strength | 0.758 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | No Break | ASTM D256 | |
| Unnotched Izod Impact (3.18 mm) | No Break | ASTM D4812 |
| Additional Information |
|---|
| Mold Shrinkage, Linear-Flow, ASTM D955, ¼": 15-25 mil/in |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 163 - 232 | °C | |
| Middle Temperature | 163 - 232 | °C | |
| Front Temperature | 163 - 232 | °C | |
| Mold Temperature | 15.6 - 65.6 | °C | |
| Injection Pressure | 34.5 - 103 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Clamp Tonnage | 4.1 - 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMOFIN PPC343T4 | Polyram Ram-On Industries | PP Copolymer | RAMOFIN |
| Stylac™ 185 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| NILAMID® A3 H GCF3010 | Nilit Plastics | Nylon 66 | NILAMID® |
| CALIBRE™ 5201-12 | Trinseo | PC | CALIBRE™ |
| Colorite 11 Series 9511 | Colorite Polymers | PVC, Unspecified | Colorite 11 Series |
