Order Products : sales@su-jiao.com
SureSpec GS-100
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NgtIdE_SureSpec-GS-100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GS-100 is a High Impact Polystyrene certified prime grade specially developed for injection molding applications requiring high surface Scuff resistance. GS-100 offers high-flow processability, excellent uniformity and consistency of melt viscosity, fast cycling, superior Flexural strength and optimal Toughness of molded articles for improvement of flexural and toughness properties. GS-100 complies with FDA regulation 21CFR 177.1640 and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 10 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3130 | MPa | ASTM D638 |
| Tensile Strength 1(Yield) | 47.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 1.3 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 3500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 82.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 93.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 361 | Melos GmbH | TPO (POE) | Melos™ |
| UNIVAL™ DMDG-6200 NT 7 | The Dow Chemical Company | HDPE | UNIVAL™ |
| Bergamid™ B70 G30 Black | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Fainplast PVC PG 7030 | Fainplast Compounds S.r.l | PVC+NBR | Fainplast PVC |
| KumhoSunny ASA XC230G | Shanghai KumhoSunny Plastics Co., Ltd. | ASA | KumhoSunny ASA |
