Order Products : sales@su-jiao.com
DENILUB B 00U 1Si
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NgMquD_DENILUB-B-00U-1Si.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBT unfilled with silicon. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 1.9 | % | |
| Across Flow | 1.9 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 10 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.15 | ||
| Static | 0.18 | ||
| Wear Factor 1 | 50.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 3.5 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 90 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 60.0 | °C | ASTM D648A |
| Vicat Softening Temperature | 180 | °C | ASTM D1525 2 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Seblex® 7848 | PolyPacific Pty. Ltd. | PP, Unspecified | Seblex® |
| ALTECH® PA6 A 2045/100 GF45 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| AMTOPP TL22 | Inteplast Group | PP, Unspecified | AMTOPP |
| LNP™ LUBRICOMP™ RFL33 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
| ESTOPLAST SR 1500GY01 | Ester Industries Ltd. | ABS | ESTOPLAST SR |
