Order Products : sales@su-jiao.com
Vythene™ VYT/11X-50 RV1 CLEAR TL 0002
| Category: | PVC+PUR , Polyvinyl Chloride + PUR |
| Manufacturer: | AlphaGary |
| Trademark: | Vythene™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Nfb66g_Vythene-VYT-11X-50-RV1-CLEAR-TL-0002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| VYT/11X-50 RV1 Clear TL 0002 is a "non-toxic" Vythene compound which combines the best qualities of a thermoplastic elastomer and vinyl at an economical cost. This compound processes easily on conventional injection blow molding equipment and does not require pre-drying. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 - 1.18 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, 6.35 mm) | 45 - 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (1.91 mm) | 2.69 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 1.91 mm) | 470 | % | ASTM D638 |
| Wear resistance- loss, 5000 cycles | 1 | % | ASTM D1044 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 35.0 | kN/m | ASTM D1004 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -55.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 149 - 166 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 138 | °C | |
| Cylinder Zone 2 Temp. | 149 | °C | |
| Cylinder Zone 3 Temp. | 154 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 166 | °C | |
| Adapter Temperature | 166 | °C | |
| Melt Temperature | 166 - 171 | °C | |
| Die Temperature | 166 | °C |
| Extrusion instructions |
|---|
| Material can be processed utilizing standard PVC extrusion screws and tooling |
| Note Message | |
|---|---|
| 1 . | Graves |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 805 TFE 15 | RTP Company | Acetal (POM) Copolymer | RTP |
| Toughblend® PBT-1600 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PBT | Toughblend® |
| Fibremod™ GD302HP | Borealis AG | PP, Unspecified | Fibremod™ |
| Petro Rabigh PE FS350A | Rabigh Refining & Petrochemical Co. | LLDPE | Petro Rabigh PE |
| LNP™ LUBRICOMP™ KL004U compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
