Order Products : sales@su-jiao.com
Algoflon® L101-1
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Algoflon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NeI8MP_Algoflon-L101-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Algoflon®L101-1 is a white PTFE micropowder containing loose agglomerates of submicron-sized particles. It has excellent chemical and heat resistance, low surface energy and low friction coefficient. Algoflon®The L101-1 is mainly designed to be used as a high-quality grease additive. Specific surface area higher than Algoflon®L203, can reduce the amount of use to reduce the coefficient of friction and improve the friction and wear performance of the lubricating oil. Algoflon®L101-1 can be used in ink to improve abrasion resistance, scratch resistance and scrub resistance. Algoflon®Main features of L101-1
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.30 | g/cm³ | ASTM D4895 |
| Specific surface area | > 14 | m²/g | Internal method |
| Average Particle Size | Internal method | ||
| -- | 3.5 | µm | Internal method |
| Primary election | 0.14 | µm | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 328 - 332 | °C | ASTM D3418 |
| Additional Information |
|---|
| 加工 作为助剂， Algoflon® L101-1 可用于许多产品中。由于分子量低，不适合用作注塑或挤塑用树脂。通常按照树脂重量的5-30% 进行添加。必须小心控制材料的添加及与基体材料的混合。建议在低于30 ℃下进行混合，以获得均匀的混合物。 Algoflon® L 超细粉可以通过各种混合设备分散。推进式混合器可用于潮湿混合物。玻璃珠研磨机推荐用于高粘性混合物，辊式破碎机通常用于超高粘度产品，如油和润滑脂。对于干燥混合物，则用高速搅拌器和烘干搅拌机。 -如果基体树脂是弹性体， Algoflon® L101-1可先与其它填充物混合，然后在常规条件下进行最终加工前，添加到弹性体中。存储及操作-如果在低于 30°C的干燥整洁的环境下存储，则不需要考虑Algoflon® L101-1超细粉的保质期。安全性及毒理性-使用PTFE Algoflon® L 超细粉前，请参阅产品的材料安全数据表单，并遵循所有标签指南和操作注意事项。 和所有PTFE材料一样，操作和加工必须在通风良好的场所进行，设备上方应安装蒸汽抽气装置。不能吸入烟雾，应避免接触皮肤和眼睛。如有皮肤接触，用肥皂和水清洗干净。如触及眼睛，应立即用大量清水冲洗，并寻求医疗帮助。不要在粉尘、蒸汽或烟雾污染的环境吸烟。 -废物处置详细建议请参考材料安全数据表单。包装 Algoflon® L101-1 用一次性桶包装，每桶20公斤。每只桶内有1只聚乙烯树脂衬袋。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® BR16BL6093 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| FERROPAK® TPP40WA04NA | Ferro Corporation | PP, Unspecified | FERROPAK® |
| Generic API | Generic | API | Generic |
| Hytrel® SC956 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| OXNILON 66 15 PTFE 30GF | Oxford Polymers | Nylon 66 | OXNILON 66 |
