Order Products : sales@su-jiao.com
POLYFLON™ M-392
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | Daikin Fluorochemicals (China) Co., Ltd. |
| Trademark: | POLYFLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NdGQiv_POLYFLON-M-392.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYFLON PTFE M-series is a granular powder for compression molding. As melt viscosity is extremely high, it cannot be used for molding applied to general plastic. Therefore basically at first it is compressed in the mold and is fused by sintering over its melting point. Various molding methods are developed. There are many types of POLYFLON PTFE to be applied the methods, conditions in mold processing and application. Features Good flowability, small particle size, sharp particle size distribution and low electrostatic charging property. Suited for thin-walled mold gap and iso static molding because of the excellent filling property. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Apparent Density | 0.86 | g/cm³ | |
| Average Particle Size | 400 | µm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ranger PBT PBT-201-G10 211 | Beijing Ranger Chemical Co., Ltd. | PBT | Ranger PBT |
| TAROMID B 280 R3 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| U-polymer UG-100-20 | UNITIKA Plastics Division | Polyarylate | U-polymer |
| GLS ABS SG69 | GLS Polymers Pvt. Ltd. | ABS | GLS ABS |
| Kingfa ABP-2119 | Kingfa | PP, Unspecified | Kingfa |
