Order Products : sales@su-jiao.com
LNP™ LUBRICOMP™ OX97635 compound
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ LUBRICOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NbqTQf_LNP-LUBRICOMP-OX97635-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP LUBRICOMP* OX97635 is a compound based on Polyphenylene Sulfide resin containing Proprietary Filler(s). Added features of this material include: Electrically Conductive, Wear Resistant. Also known as: LNP* LUBRICOMP* Compound PDX-O-97635 Product reorder name: OX97635 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow : 24 hr | 0.10 | % | ASTM D955 |
| Across Flow : 24 hr | 0.40 | % | ASTM D955 |
| Across Flow : 24 hr | 0.44 | % | ISO 294-4 |
| Flow : 24 hr | 0.060 | % | ISO 294-4 |
| Water Absorption | |||
| 24 hr, 50% RH | 0.020 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.020 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 23000 | MPa | ASTM D638 |
| -- | 26200 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Break | 121 | MPa | ASTM D638 |
| Break | 165 | MPa | ISO 527-2 |
| Tensile Elongation (Break) | 0.80 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | |||
| -- | 24500 | MPa | ASTM D790 |
| -- | 25900 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 253 | MPa | ASTM D790 |
| -- | 260 | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 Modified | ||
| vs. Itself - Dynamic | 0.36 | ||
| vs. Itself - Static | 0.32 | ||
| Wear Factor - Washer | 47.0 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 48 | J/m | ASTM D256 |
| 23°C 2 | 5.7 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 400 | J/m | ASTM D4812 |
| 23°C 3 | 24 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Energy at Peak Load | 4.50 | J | ASTM D3763 |
| -- | 2.19 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, Unannealed, 3.20 mm | 269 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 4 | 265 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 304 to 316 | °C | |
| Middle Temperature | 321 to 332 | °C | |
| Front Temperature | 332 to 343 | °C | |
| Processing (Melt) Temp | 316 to 321 | °C | |
| Mold Temperature | 138 to 166 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP PA66 HI 40 GF BLK | RTP Company | Nylon 66 | RTP |
| Borealis PP RB206MO | Borealis AG | PP Random Copolymer | Borealis PP |
| Dialon 3035 | DTR S.r.l. (Develop Thermoplastic Resins) | PC | Dialon |
| MAJORIS CW337 - 7731 | AD majoris | PP Homopolymer | MAJORIS |
| OTECH TPO OTR8588 - Gasket | OTECH Corporation | TPE | OTECH TPO |
